LEVER SOFTWARELiDAR Room Plan

LiDAR room plans and moisture mapping

Scan the room.Map the whole job.

Walk each affected room with a LiDAR-equipped iPhone or iPad and the floor plan is ready when you finish the scan. Map moisture readings, drying equipment, photos and notes right where they are, track structural drying day by day, and send a clean Floorplan Report to the adjuster.

Book a tour See how it works

Works offline

No fee per sketch

Instant floor plans

Works fully offline

No fee per sketch

Moisture mapping

Equipment tracking

Affected areas

Photos on the plan

Notes for the crew

Room calculations

Floorplan Report PDF

2D and 3D views

Synced to the office

WHAT YOU GET

Faster maps. Faster starts. Faster pay.

On a water loss, the scan is done before you’d have the tape measure out. Your crew starts sooner, and the documentation is already on its way to the adjuster.

Instant floor plan.

The plan is ready the moment you finish the scan, with nothing to draw up later.

Built on RoomPlan.

LiDAR on iPhone Pro and iPad Pro puts walls, doors and windows where they are.

Works fully offline.

Scan, plot and take readings in a basement or crawlspace with no signal at all.

Oversight from the office.

See every room, reading and unit on the job without driving out to the site.

One app for the whole job.

It’s part of the Lever360 mobile app your team already uses. No second login.

Start sooner, get paid faster.

Faster maps cut cycle time, and a clear report gives the adjuster what they need.

INCLUDED WITH LEVER360

Scan every room on every job. Nothing extra to pay for.

No fee per sketch or per scan

No add-on subscription

No waiting on a processed map

WHY IT MATTERS

Clear documentation for everyone on the loss.

The drying story usually lives in too many places: photos in a camera roll, readings on a clipboard and a sketch on the work order. The Room Plan puts it all on one map.

The crew that comes back.

Techs back for monitoring see every point, unit and wet area right where it was left.

Production managers in the office.

See which rooms are still wet, what’s running and what changed today, without a call.

Owners and operations managers.

Get a clear picture of every water mitigation job without going out to the site.

Outside parties get the PDF.

Customers, adjusters, carriers and TPAs get a clean Floorplan Report from the same plan.

HOW IT WORKS

From the first walk-through to the adjuster’s inbox.

Scan.

Walk each affected room with a LiDAR iPhone or iPad. Walls, doors and windows are picked up.

Plot.

Drop moisture points, equipment, wet areas, photos and notes right where they are in the room.

Track.

Each drying day gets its own map, so every visit shows readings, equipment and the dry goal.

Report.

Share a Floorplan Report PDF for one room or the whole job, built from the latest readings.

LiDAR room scan

Scan the room. Get the floor plan and the numbers.

LiDAR maps the room as you walk it, so there’s no sketch to redraw back at the office. Room dimensions are captured at the same time, and one scan feeds an accurate scope and estimate.

Instant scan.

The plan is ready to view the moment you finish. No waiting on processing.

2D and 3D, one tap.

Flip between the flat floor plan and the 3D view whenever you need it.

It picks up the room.

Walls, doors, windows, partitions and furniture are captured as you walk.

Room math, done.

Square feet, linear feet and cubic feet carry into scope line items.

Room calculations

The scan does the measuring for your scope and estimate.

Floor area, wall area, perimeter, ceiling height and volume are calculated when the room is saved, and they carry straight into scope line items and the estimate. No tape measure, no hand math, no retyping.

Scan

Room measured

Scope

Quantities filled in

Estimate

Line items priced

Every number from one scan.
Square feet, linear feet and cubic feet for each room, ready for scope.
Equipment days backed up.
Set and pulled times from the plan support the equipment line items.

See estimates and scopes

Book a tour See pricing

See a scan turn into a floor plan, live.

We’ll walk a demo job with you, from the scan to the Floorplan Report.

Book a tour See pricing

Moisture mapping

Map moisture, equipment and photos right on the floor plan.

Everything goes on the plan in the spot it belongs, so your crew, production team and office see the room the way the tech saw it.

Readings.

Place each point where the reading was taken, then watch it dry.

Equipment.

Place dehus and air movers, rotate them and set the marker height.

Wet areas.

Outline the wet area so everyone can see exactly what’s affected.

Photos.

Pin photos and notes for the crew right where they were taken.

Drying day by day

A map for every room, every day, on every job.

Each room keeps its own map for each day of structural drying. Pick a day and see the room as it was: the readings, the equipment that was running and how close each point was to the dry standard.

Any day, one tap.

Jump to any drying day. Past days are view-only, so the record holds.

Readings stay on the point.

Each point keeps its reading history, drying progress and dry goal.

Affected areas, marked.

Outline wet areas on the plan and watch them shrink as the room dries.

Warnings where needed.

Condensation warnings show on the form and jump to the point on the plan.

See the Dry Log

Book a tour See pricing

Watch the room dry, day by day.

Above goal

At goal

Wet area

Equipment

Note

Photo

Equipment tracking

Track every dehu and air mover, and every move.

From a room’s Equipment tab, put a dehumidifier, air mover or air scrubber on the plan, move it when the crew does, and track when it was set and pulled. Each day’s map shows what was running and where, so equipment days are easy to back up.

Place on the plan

Track pulled times

Scan equipment barcodes

Equipment shows on the days it was actually in the room, based on when it was set and pulled.

See more about equipment tracking

Book a tour See pricing

Job site photos and notes

Pin notes and photos where they matter.

Drop a note on the spot the next crew needs to check, and pin each photo where it was taken, so your production team knows exactly what happened and where.

Notes for the crew.
Leave instructions on the plan, like what to check on the next visit.
Photos with a location.
Every photo shows which wall it was taken on and how far from it.
Who and when.
Each pin keeps who took it, who placed it and the date and time.
Saved to the job.
Notes save to the job notes and photos save to the room’s pictures.

See photo documentation See job notes

Book a tour See pricing

See how the Room Plan fits with the rest of the Field Apps.

See the Field Apps Book a tour

In the details

Every wall, door, window and object, measured.

If it’s in the scan, it’s on the plan and in the report: each wall’s length, every door, window and opening, and the objects in the room.

Kitchen · from one scan

Floor area

155.4 sq ft

Wall area

471.1 sq ft

Perimeter

52.34 ft

Ceiling height

9.00 ft

Room volume

1,398.6 cu ft

Openings

1 window · 2 doors

Wall by wall

W110.04 ft

W212.00 ft

W314.17 ft

W48.26 ft

W54.13 ft

W63.74 ft

Layers on and off.

Show just moisture, just equipment or everything at once.

Synced to the team.

What the field plots syncs, so everyone sees the latest plan.

Android can edit.

Android phones and tablets can open and edit any synced plan.

View-only access.

Share plans, readings and equipment without giving edit rights.

Floorplan Report

A report the adjuster can read at a glance.

Generate a clean PDF for one room or every room on the job. The floor plan, moisture points, equipment, readings by day and every measured wall and opening are laid out for you. Preview it, then share it with the customer, agent, adjuster, carrier or TPA right from the field.

One room or every room on the job
Readings by day, with dry goal status
Every wall, door and window measured
Wall numbers that match 2D, 3D and PDF
Preview and share right from the app

Built into the job

Not a separate app. Part of the job.

The Room Plan lives on the room, inside the job. What you plot, the Dryout Log, the equipment log and the room photos are the same records, so nothing gets entered twice.

Room Plan

On the room, in the job

Dryout Log

Readings by day, same records

Equipment

Set and pulled times

Photos

Pinned where they were taken

Notes

Left on the plan for the crew

Room calculations

Into scope and the estimate

Floorplan Report

For the customer, adjuster or TPA

See how the Field Apps fit together See all features

Who it’s for

Built for everyone who touches the job.

Field techs

Instant scans on site, and every reading, unit and note plotted once, right where it is.

Estimators

Clear visuals and measured quantities to build the estimate from, without a site visit.

Project managers

Deeper insight into every room and drying day, even when you’re working remotely.

Marketing

Clean plans and reports that tell the story of a job and show how your team works.

Devices

What you need to scan, and who can see it.

Scan with

A LiDAR-equipped iPhone Pro or iPad Pro.

View and edit

Android phones and tablets, once it syncs.

View only

Anyone you give view-only access to plans.

Questions

LiDAR room plan and moisture mapping questions

Do I need a LiDAR device?

Only to scan. Scanning a room takes a LiDAR-equipped iPhone Pro or iPad Pro. Once the plan is synced, the rest of the team can open it, including on Android.

Can Android users see the Room Plan?

Yes. Android phones and tablets can view and edit synced plans. Creating the scan itself needs a supported iPhone or iPad.

What happens if I rescan a room?

Rescanning gives the room a fresh plan. You re-place your moisture points and equipment on the new plan so they line up with the new layout.

Can I share it with the adjuster?

Yes. Generate the Floorplan Report PDF for one room or every room on the job, preview it, and share it from the app with the customer, agent, adjuster, carrier or TPA.

Do the room dimensions carry into my scope and estimate?

Yes. Dimensions are captured when you create the room, and square footage, linear feet and cubic feet carry into scope line items and the estimate.

Can I see what the room looked like on an earlier day?

Yes. Pick any drying day to see the plan as it was that day. Past days are view-only.

Does it replace the Dryout Log?

No, they work together. Moisture readings are the same records in the Room Plan and the Dryout Log, and the Moisture form jumps straight to the point on the plan.

What units does it use?

Feet, feet and inches, or meters. Area and volume follow your measurement units, and the PDF uses them too.

How does moisture mapping work in Lever360?

Each moisture point is placed on the room’s floor plan where the reading was taken. Readings stay tied to that point every day of the dry, so the map shows which areas are still wet, which are drying, and which have reached the Dry Goal.

Do I still need to sketch the loss by hand?

No. A LiDAR scan creates the floor plan, with walls, doors, windows and openings, and the room dimensions are captured at the same time.

Can the office see what’s happening on the job without going on site?

Yes. What the field plots syncs to the team, so production managers, operations managers and owners can open any room and see the readings, equipment, affected areas, photos and notes for any drying day.

Does it work offline?

Yes. Scanning, plotting and taking readings all work fully offline, so a basement or crawlspace with no signal never holds up the job.

Is there an extra fee per scan or sketch?

No. LiDAR Room Plan is part of the Lever360 mobile app. There is no additional app, no additional subscription and no additional fee per sketch.

The Lever360 Platform

Three levers. Pull all three and the whole company moves.

Lever360 is three products built around the same restoration job. Software runs the operation. Learning Lever trains the team. RTI certifies the trade. Use one. Use all three — they compound.

Software is one lever

You're running the company here. The other two make it compound.

Software runs the operation — every job, crew, dollar and conversation lives here. Add Learning Lever and RTI and the same techs ramp faster, bill higher, and stay longer. One lever moves the company. Three move it harder.

Learning Lever is one lever

You're training the team here. The other two make the training stick.

Learning Lever onboards faster and keeps the whole team sharp. Software is where that training shows up in the work. RTI is where it becomes a credential customers trust. Pull one — pull all three and the math compounds.

RTI is one lever

You're certifying the trade here. The other two carry the credential to the field.

RTI certifies the trade — IICRC WRT, ASD, AMRT, FSRT and beyond. Software runs the company those certified techs work for. Learning Lever ramps everyone in between. One lever moves things. Three move the whole crew.

See the whole platform

You are here

The System of Record

Lever360 Software

Run the company. Every job, crew, dollar and conversation lives here.

Jobs & scheduling

Billing & job cost

Field apps · offline

Explore Software

You are here

The System of Growth

Learning Lever

Onboard faster, upskill your team, and keep everyone sharp — on the same platform.

Role-based tracks

On-demand modules

Full LMS + reporting

Explore Learning Lever

You are here

The System of Certification

Restoration Technical Institute

IICRC-approved instruction — WRT, ASD, AMRT, FSRT and more — live and online.

IICRC WRT · ASD · AMRT

Live + online formats

Continuing education

Browse courses

Bundled Pricing

Customers who run Software + Learning Lever together save 22% and onboard techs 3× faster.

Bundle pricing

Talk to sales

Water mitigation

Structural drying

Daily moisture readings

Dry standard tracking

Scopes and estimates

Adjusters, carriers and TPAs

Mitigation crews

Production managers

Operational oversight

Property restoration

Lever Software · LiDAR Room Plan

See the Room Plan on a real job.

We’ll walk you through a scan, plotting and a Floorplan Report on a demo job, and show you how it fits the way your team already works. Built for property restoration professionals, with no extra app, no extra subscription and no fee per sketch.

Book a tour See the Field Apps

LiDAR room plans and moisture mapping

Faster maps. Faster starts. Faster pay.

Instant floor plan.

Built on RoomPlan.

Works fully offline.

Oversight from the office.

One app for the whole job.

Start sooner, get paid faster.

Clear documentation for everyone on the loss.

The crew that comes back.

Production managers in the office.

Owners and operations managers.

Outside parties get the PDF.

From the first walk-through to the adjuster’s inbox.

Scan.

Plot.

Track.

Report.

Scan the room. Get the floor plan and the numbers.

Instant scan.

2D and 3D, one tap.

It picks up the room.

Room math, done.

The scan does the measuring for your scope and estimate.

Map moisture, equipment and photos right on the floor plan.

Readings.

Equipment.

Wet areas.

Photos.

A map for every room, every day, on every job.

Any day, one tap.

Readings stay on the point.

Affected areas, marked.

Warnings where needed.

Watch the room dry, day by day.

Track every dehu and air mover, and every move.

Pin notes and photos where they matter.

Every wall, door, window and object, measured.

Layers on and off.

Synced to the team.

Android can edit.

View-only access.

A report the adjuster can read at a glance.

Not a separate app. Part of the job.

Built for everyone who touches the job.

Field techs

Estimators

Project managers

Marketing

What you need to scan, and who can see it.

LiDAR room plan and moisture mapping questions

Do I need a LiDAR device?

Can Android users see the Room Plan?

What happens if I rescan a room?

Can I share it with the adjuster?

Do the room dimensions carry into my scope and estimate?

Can I see what the room looked like on an earlier day?

Does it replace the Dryout Log?

What units does it use?

How does moisture mapping work in Lever360?

Do I still need to sketch the loss by hand?

Can the office see what’s happening on the job without going on site?

Does it work offline?

Is there an extra fee per scan or sketch?

Three levers. Pull all three and the whole company moves.

You're running the company here. The other two make it compound.

You're training the team here. The other two make the training stick.

You're certifying the trade here. The other two carry the credential to the field.

See the Room Plan on a real job.

Get property restoration success tips.